Tool traveling and tool switching time constitute almost seventy percent (70%) of the total timeconsumed in drilling process. This fact that 70% of the total time is nonproductive and does not add any value to the job, grabs attention of the researchers and the industrialist for optimization. A literature on drilling process revealed that very few ...

By Mehmood Nasir, Muhammad Umer, Umer Asgher

The issues addressed in this paper are dedicated to the balancing and analysis of coal reserves for the system of underground exploitation in the Republic of Serbia, both in active mines – deposits and in prospective deposits for activation in terms of production. The basic message emphasizes the importance of coal as the leading domestic ene...

By Zorica Ivković, Dražana Tošić, Dejan Dramlić

The aim of the paper is to show the landslide that damaged the transmission line pole, and its remediation. The landslide is located in Tuzla, and the microlocation of the facility is located in the area of the Dolina and the settlement of Vrapče. The remediation was made on the basis of a study on the characteristics of the terrain and the design ...

By Zlatan Talić, Medina Mešić

The aim of this paper is to present a landslide remediation based on research and testing of samples, and to list those measures that will help to remediate the landslide or partially mitigate its further effects. These measures include: closing cracks, collecting and draining surface water from landslides, terrain planning, making supports from st...

By Zlatan Talić, Dženita Cerić

The control factors of mineralization in the Ljubija ore region are stratigraphic, lithological, magmatogenic, structural-tectonic and hypergenic. The distribution of iron ores in the Ljubija ore region is primarily controlled by the spread of the Olistostrome member of the Carboniferous Javorik flysch formation. Only that member, whether uncovered...

By Aleksej Milošević, Aleksandar Grubić, Ranko Cvijić, Miodrag Čelebić, Boško Vuković

One of the most important influencing factors on the economy of mines with surface and underground exploitation is the correct choice of haulage technology of ore and waste.The paper analyzes the haulage of ore and waste in the Lead and Zinc Mine “Sase” Srebrenica and determines the optimal haulage length on the four excavation blocks for the appli...

By Duško Torbica, Vladimir Malbašić, Dražana Tošić, Jovan Popović

The tentative permissible concentrations and the maximum permissible concentration of heavy metals do not always give a complete adequate assessment of the effect on plants. Plant growth inhibition can be at concentrations below the maximum permissible concentrations and tentative permissible concentrations. We studied the effect of copper, zinc, c...

By Evgeny Aleksandrovich Gladkov, Olga Victorovna Gladkova

This paper presents an analysis of water flow and flow velocity in an open channel of rectangular cross section as a function of channel roughness, ie Manning roughness coefficient. Three different cases of finishing the open channel of rectangular cross-section were analyzed, namely the concrete channel, the channel with smoothed cement mortar and...

By Nedim Suljić

The task was set, due to the capabilities of modern software systems, to assess the effect of the increase in inelastic deformations under prolonged load action on the loss of stability of thin-walled dome coverings. The study of the dependences of the forms of the loss of stability of dome covering from creep concrete that will help further with o...

By Sergey Gridnev, Ekaterina Prokshits, Olga Sotnikova, Iana Zolotukhina

This paper presents research results of the Bugojno coal basin, which contains very significant, but still insufficiently explored lignite reserves. Based on the determined borders of surface distribution and the research results in the northwestern part of the Bugojno coal basin, proved are four coal layers with reserves of over one billion tons o...

By Dževad Forčaković, Rejhana Dervišević